Protection engineering

Electrical Supplies Buying Guide: Leviton Switches, 60 Amp Generators, and When Cheap Is Actually Right

Why I Stopped Treating "Buy Quality" as a Universal Rule

Six years. $180,000 in cumulative electrical supply spending. That's my track record as the procurement manager for a 45-person electrical contracting company.

And here's the truth: I used to think "always buy quality" was the answer. Then I spent $40 on a professional-grade spark plug socket I use twice a year. That's not quality—that's just expensive.

What I actually do now is break every electrical purchase into one of four scenarios: smart switches and dimmers, portable generators, voltage testers, and basic hand tools. Same budget, different rules.

Scenario 1: Smart Switches and Dimmers — Where Quality Always Wins

If you're installing a leviton light switch with dimmer—or any smart switch—cutting corners here costs you more later. I've got the receipts.

When I audited our 2023 spending, I found we'd replaced 18 cheap dimmers over two years. At $12 each, that's $216 in parts. The Leviton units we eventually installed cost $28 each, but we've had zero failures in 14 months (as of January 2025).

But the part cost isn't the real problem. It's the labor.

"The electrician charges $85 per service call," my predecessor told me when I started. "Do the math."

I didn't listen at first. I approved a batch of no-name dimmers for a tenant improvement project because they saved us $320 on the initial order. Six months later, three had failed. The service calls alone cost $255. The "savings" were gone.

That's the classic reverse validation: I only believed the advice about brand-name switches after ignoring it and eating the difference.

Here's what actually matters with the leviton motion sensor dimmer switch line: the no-neutral option. If your building was wired before 2011, you probably don't have a neutral wire at the switch box. Most smart switches need that neutral wire. Leviton's no-neutral models don't. That's not a feature—that's a $400 rewiring problem you're avoiding.

The brand reputation is nice. But the no-neutral compatibility is what made me a repeat customer.

For any leviton-switch purchase, I check three things before ordering: neutral wire requirement, dimming compatibility with existing fixtures, and warranty length on the electronics—not just the mechanical switch. The cheapest option almost always fails one of those three.

Per Leviton's 2024 wiring compatibility guide, the no-neutral dimmers work with LED loads down to 5W. Older dimmers often need 25W minimum. That's the difference between a dimmer that flickers with your LED retrofit and one that works.

Scenario 2: Portable Generators — Where Sizing Beats Branding

We bought a 60 amp portable generator for backup power on our machine shop floor. This is a different decision entirely.

With generators, the brand matters less than the math. You need to size it correctly the first time. I assumed "60 amp" meant the same thing across manufacturers. Didn't verify. Turned out one vendor's 60 amp unit had a running wattage of 7,200W; another had 9,600W. Same label. Different reality.

That's the kind of "standard" that isn't standard.

For our 60 amp portable generator purchase, I built a comparison spreadsheet covering:

  • Running watts vs. peak watts (peak only lasts 3-5 seconds—it's not the number that matters)
  • Fuel consumption at 50% load (the actual number you'll see in use)
  • Noise level in dB at 7 meters (in case neighbors care—they will)
  • Warranty terms on the alternator specifically, not just the engine

Three vendors quoted us between $2,800 and $4,200—give or take a few hundred, depending on delivery terms—for roughly similar specs. We went with the $3,400 option. Not the cheapest, not the most expensive. The deciding factor was the alternator warranty: 3 years vs. 1 year on the cheaper unit.

Here's the thing: a portable generator can sit idle for 11 months and then be critical for 3 days. That idle time is where cheap units fail. The $2,800 option had a 1-year warranty that didn't cover corrosion from storage.

If you're buying a generator for occasional use, focus on storage durability and warranty terms. The brand name is secondary.

Scenario 3: Voltage Tester Pens — Where Cheap Is Dangerous

A voltage tester pen how to use search probably brought you here. Good. Because this is the one category where I don't compromise.

I made the classic rookie mistake in my first year: bought a $7 tester pen from a bin at the checkout counter. It worked fine for six months. Then it gave me a false negative—showed no voltage on a live circuit.

That cost me a near-miss and a $300 electrician visit to verify I hadn't damaged anything (unfortunately, our regular guy doesn't do free callbacks).

Here's what I use now: a professional-grade non-contact voltage tester. Around $65 as of January 2025. It's not fancy. But it has a self-test feature that confirms the internal circuit is working before each use.

That $7 unit had no self-test. That's the difference between "probably fine" and "actually safe."

For voltage testing, buy the most reliable option with a self-test function. The price difference between $7 and $65 is nothing compared to a safety incident.

Scenario 4: Basic Hand Tools Like Spark Plug Sockets — Where Cheap Is Fine (Really)

Now here's the counterintuitive part.

You need an autozone spark plug socket for your generator maintenance. It's a specialized socket with a rubber insert that grips the spark plug. The pro-grade version costs $35 at a supply house. The Autozone version costs $8.

Buy the $8 one.

I know—I just spent three sections telling you to pay for quality. But this is the exception. Here's why:

A spark plug socket gets used maybe four times a year for generator maintenance. It has no moving parts. It's a piece of metal with a rubber insert. The $8 version will last five years in that application. The $35 version will also last five years.

The $27 difference buys you nothing in this scenario.

Where I do recommend going premium: torque wrenches, multimeters, safety equipment. Those are daily-use or safety-critical. A spark plug socket is neither.

My rule now: if it has no moving parts, gets used less than monthly, and failure won't hurt anyone—buy the economical option.

How to Know Which Scenario You're In

Run your purchase through three questions:

  1. Will a failure be dangerous? If yes—voltage tester, safety gear—buy the most reliable option. Price is secondary.
  2. Will someone outside your company see it? If yes—customer-facing switch plates, lobby dimmers, anything in a finished space—buy quality. The first impression of your work is the switch plate they touch every day. A $12 dimmer that fails in six months tells them everything about how you build.
  3. Is it used weekly? If yes—daily-use tools—buy quality. The cost-per-use drops fast.

If the answer to all three is "no"—occasional use, internal only, low failure risk—buy the economical option. You're not being cheap. You're being appropriate.

I keep a simple spreadsheet with three columns: purchase, scenario type, and outcome. After six years, the pattern is clear. The "expensive" Leviton switches had zero failures. The "bargain" dimmers had a 30% failure rate. The $65 voltage tester is still working fine after five years. The $8 spark plug socket hasn't stripped once.

Both of those cheap decisions were right. Both of those expensive ones were right, too. The trick is knowing which scenario you're in before you order.

Kwame Boateng

Kwame Boateng

Kwame Boateng is a transformer and power-conversion analyst specializing in distribution transformers, power supplies, inverters, and network integration. He uses IEC 60076 test data for transformer ratio, impedance, losses, and temperature rise, and IEC 62477-1 safety requirements for converter insulation and thermal boundaries while separately comparing harmonics and efficiency curves. He helps engineers and sourcing teams compare equipment against duty profiles, environmental limits, short-circuit behavior, lifecycle energy cost, and service requirements.